| time | |||||
|---|---|---|---|---|---|
| 9.15 - 10.30 | Invited Talks (Aula) | ||||
| Shiv G. Kapoor "CNT- Composites for the Micro-World - Design for Functionality & Manufacturabilty" | |||||
| Dave Blank "Perspectives in Micro and Nanofabrication of new functional materials" | |||||
| 10.30 - 11.15 | Coffee Break / Poster Session (Foyer) | ||||
| 11.15 - 12.30 | Thematic Session 5 & 6 | ||||
| Novel Materials Processing (Aula) | Process Modelling (Room 236) | ||||
| Chair: Per Johander | Chair: Ulf Engel | ||||
|
29. Simple techniques of applying lacquer based assisting electrodes for spark erosive structuring of electrically nonconductive zirconia (ZrO2) 46. Micromixing Structures for Lab-on Chip Applications: Fabrication and Simulation of 90° Zigzag Microchannels in Dry Film Resist 62. The effects of surface integrity of components processed through Micro WEDM 94. Generating Continuous Chaotic Mixing in a Twin Screw Extruder as a Means of Improving the Dispersion of Nano-Materials and Polymer Blends |
28. On the environmental influence on the force between two metallic plates of a gripper immersed in a nonpolar fluid: the role of the temperature and the chemical potential. 59. Wire electrochemical discharge machining of glass using a surface roughened tool 99. Modelling machining forces for fcc metals 100. Micro-Bending of Thin Stainless Steel Sheets |
||||
| 12.30 - 14.00 | Lunch | ||||
| 14.00 - 15.30 | Affilliate Project Sessions | ||||
| MultiLayer (Aula) | CoTech (Room 236) | ||||
| Chair: Paul Kirby | Chair: Humbert Noll | ||||
|
112. MULTILAYER: a large scale production of micro devices via new rolled multi material layered 3D shaping technology 15. New approach for development of software for layer based micro-machining 23. One- and two-component powder injection moulding for micro fabrication 38. Thermography multi-material micromanufacture inspection 61. Compensation of the size effect due to the cutter radius offset in the micro milling process |
111. The European large-scale integrating project COTECH “COnverging TECHnologies for micro systems manufacturing" 66. Influence of measuring parameters on the precision of atomic force microscope in industrial applications 76. Injection-compression moulding of high precision optical lenses 97. Novel process chain for fabrication of Ni shims 103. Snapshot of Micro EDM technology for industry |
||||
| 15.30 - 16.00 | Coffee Break / Poster Session | ||||
| 16.00 - 17.15 | Thematic Session 7 & 8 | ||||
| Process Characterisation (Aula) | Novel Processes (Room 236) | ||||
| Chair: ?? | Chair: Sabino Azcarate | ||||
|
73. Effect of Grain Size During Electrical Assisted Microforming 75. Micro hole punching system—determination, control and effects of clearance 105. Mechanical properties test and microstructure analysis of polyoxymethylene (POM) micro injection moulded standard parts 96. Micro-injection moulding using Si/SU-8 based mould inserts 70. Production of gratings by means of step and repeat hot embossing |
74. Flow control in microfluidic chips: Material choice and smart design 78. Development of a flexible gripper system for small optical assemblies 79. A new technology for contamination free dispensing 98. Surface acoustic wave (SAW) sensors, the development of a versatile sensor 77. Simulation of electrostatic self-assembly of microparts |
||||
| 18.00 - 20.00 | Cocktail reception and tours of various facilities | ||||