Joint 4M/IWMF Programme Committee
Nadja Adamovich, TUWien, Austria
Chantal Khan-Malek, CNRS, France
Bertrand Fillon, CEA, France
Massimiliano Annoni, Politecnico di Milano, Italy
Hast Jukka, VTT, Finland
Lionel Tenchine, IPC, France
Kornel Ehmann, Northwestern University, USA
Jian Cao, Northwestern University, USA
Antony H.C.Lee, MIRDC, Taiwan
Michael-Fu, MIRDC, Taiwan
G. Maccarini, Università Degli Studi Di Bergamo, Italy
Thomas Velten, Fraunhofer IBMT, Germany
Susan Anson, KIT, Germany
Kiwamu Ashida, AIST, Japan
Dong-Woo Cho, Postech, Korea
Kai Cheng, Brunel University, UK
Nico de Rooij, EPFL, Switzerland
Kuniaki Doda, Northwestern University, USA
Fengzhou Fang, Singapore Inst. of Manuf. Tech
Sergej Fatikow, University of Oldenburg, Germany
Ho-chung Fu Metal Industries Research &
Development Centre, Taiwan
Dae-Gab Gweon, Korea Adv. Institute of Science and Tech
Yong Huang, University of Florida, USA
Shiv Kapoor, Univ. of Illinois at Urbana/Champaign, USA
Byeong-Hee Kim, Kangwon University, Korea
Jongwon Kim, Seoul National University, Korea
Tae-Jo Ko, Youngnam University, Korea
Liu Kui, Singapore Institute of Manufacturing Tech.
Thomas R. Kurfess, Georgia Institute of Technology, USA
Y.S. Liao, National Taiwan University
Ming-Chyuan Lu, Nat. Chung Hsing Univ., Taiwan
Akihiro Matsumoto, Toyo University, Japan
Bernd Michel, Fraunhofer Institute, Germany
Bradley Nelson,ETH Zurich
Jun Ni, University of Michigan, USA
Hitoshi Ohmori,Riken, Japan
Yuichi Okazaki, AIST, Japan
Simon Park, University of Calgary, Canada
Hyung-Wook Park, UNIST, Korea
Jong-Kweon Park, KIMM, Korea
Duc-Truong Pham, University of Birmingham, UK
Svetan Ratchev, University of Nottingham, UK
Stephane Regnier, Universite Marie-Curie, France
Steffen Scholz, KIT, Germany
Lars Mattsson, KTH, Sweden
Rhett Mayor, Georgia Institute of Technology, USA
Eleonora Ferraris, KU Leuven, Belgium
Martin Richter, FhG EMFT, Germany
Andreas Schoth, University of Freiburg, Germany
Volker Schulze, KIT, Germany
Holger Reinecke, HSG-IMIT & IMTEK, Germany
Pieter Bolt, TNO, Netherlands
Maurice van der Beek, Philips, Netherlands
Iban Quintana, TEKNIKER, Spain
Xabier Mendibil, TEKNIKER, Spain
Jose Ignacio Esmoris, TEKNIKER, Spain
Luis Gerardo Uriarte, TEKNIKER, Spain
Elis Carlström, Swerea-IVF, Sweden
Helmut Loibl, FOTEC, Austria
Samuel Bigot, Cardiff University, UK
Emmanuel Brousseau, Cardiff University, UK
David Gardner, C-Tech Innovation, UK
Seung-Kook Ro , KIMM, Korea
Mitchell Tseng, Hong Kong Univ. of Sc. and Tech.
Reijo Tuokko, Tampere Univ. of Tech., Finland
Min-Yang Yang KAIST, Korea
Quan Zhou, Aalto University, Finland
André Zimmermann, Hahn-Schickard, Germany